Air gap on the ignition module should be .152 mm. The thickness of a clean, dry business card is close enough. Loosen the module, place a card between the module and the magnet of the flywheel. Allow the module to stick to the flywheel through the card. Tighten the module, then turn the flywheel slowly to remove the card. Good luck!
Answers & Comments
Air gap on the ignition module should be .152 mm. The thickness of a clean, dry business card is close enough.
Loosen the module, place a card between the module and the magnet of the flywheel. Allow the module to stick to the flywheel through the card. Tighten the module, then turn the flywheel slowly to remove the card.
Good luck!