Ensure you are in COPY mode press # * C * ( one after the other, fairly quickly) when the screen changes enter the number 14 on the keypad press the B&W start button press 1 for Yes when the question displays press thw CA button machine will re-boot and fault should clear. If it doesnt you need a service engineer. This is a fuser temperature fault
Answers & Comments
Ensure you are in COPY mode
press # * C * ( one after the other, fairly quickly)
when the screen changes enter the number 14 on the keypad
press the B&W start button
press 1 for Yes when the question displays
press thw CA button
machine will re-boot and fault should clear. If it doesnt you need a service engineer. This is a fuser temperature fault
Thanks a lot, very much helped.