I had the same problem with my remote. I would enter the code and there would be no response from the remote. I looked up the manual for the other comcast remote and the codes are 5 digits instead of 4. Try codes 10093 or 11602. The reason why there is no response from your remote is because it is waiting for you to enter the last digit of the code. Hope this helps.
I just bought a new Sharp Aquos and reprogrammed my Comcast remote to accept Sharps code number 0093. Here's a link to the procedure: http://www.comcast.com/MediaLibrary/1/2/CM/VanityURL/documents/comcast_dvr_remote_manual.pdf
Wish I had seen you post a while ago...thanks! Just dropping the first digit from the five digit code (making it four digits) works!Wish I had seen you post a while ago...thanks! Just dropping the first digit from the five digit code (making it four digits) works!
It is best most of the time to use the comcast remote to control the tv because it is harder to program the newer cable boxes and the comcast remote gets most of the tv codes better
Answers & Comments
I had the same problem with my remote. I would enter the code and there would be no response from the remote. I looked up the manual for the other comcast remote and the codes are 5 digits instead of 4. Try codes 10093 or 11602. The reason why there is no response from your remote is because it is waiting for you to enter the last digit of the code. Hope this helps.
I just bought a new Sharp Aquos and reprogrammed my Comcast remote to accept Sharps code number 0093. Here's a link to the procedure: http://www.comcast.com/MediaLibrary/1/2/CM/VanityURL/documents/comcast_dvr_remote_manual.pdf
Wish I had seen you post a while ago...thanks! Just dropping the first digit from the five digit code (making it four digits) works!
It is best most of the time to use the comcast remote to control the tv because it is harder to program the newer cable boxes and the comcast remote gets most of the tv codes better