Press the center button marked "T". The watch should beep once;- Touch the center of the touch-sensitive face until 24H Cm appears in the digital LCD display; - Press and hold the center button marked "T" for approx. 5 seconds. The watch will beep once and then again a second time, after 5 seconds have passed. The digital LCD display should now read SYNCHRO; - Press the upper button marked "+" to move the minute hand until it is positioned exactly at 12:00; - Press the lower button marked "-" to move the hour hand until it is also positioned exactly at 12:00; - When both hands are aligned together and pointing directly at 12:00, press the center button marked "T" to save your settings. - Your watch is now synchronized, so no expensive repair work is required!
Thanks for the valuable suggestion above! I have the exact same issue (6AE on my digital display). I have tried the above steps; everything works as expected, except that when I perform the last step (pressing the center button marked "T" to save the settings), the digital display goes back to 6AE. Any further suggestions? Thanks in advance!Thanks for the valuable suggestion above! I have the exact same issue (6AE on my digital display). I have tried the above steps; everything works as expected, except that when I perform the last step (pressing the center button marked "T" to save the settings), the digital display goes back to 6AE. Any further suggestions? Thanks in advance!
Answers & Comments
Press the center button marked "T". The watch should beep once;- Touch the center of the touch-sensitive face until 24H Cm appears in the digital LCD display;
- Press and hold the center button marked "T" for approx. 5 seconds. The watch will beep once and then again a second time, after 5 seconds have passed. The digital LCD display should now read SYNCHRO;
- Press the upper button marked "+" to move the minute hand until it is positioned exactly at 12:00;
- Press the lower button marked "-" to move the hour hand until it is also positioned exactly at 12:00;
- When both hands are aligned together and pointing directly at 12:00, press the center button marked "T" to save your settings.
- Your watch is now synchronized, so no expensive repair work is required!
Fantastic help.. thanks a lot.. worked straight away.
Mush appreciated
Thanks for the valuable suggestion above! I have the exact same issue (6AE on my digital display). I have tried the above steps; everything works as expected, except that when I perform the last step (pressing the center button marked "T" to save the settings), the digital display goes back to 6AE. Any further suggestions? Thanks in advance!
Hi I have the same problem of 6AE
so could you please help me out in rectifying it...