slow down" and it started making noises but not doing anything. Question: Was I given wrong instructions? Finally I had to turn off power as it just kept going and going but not really doing anything.Thanks for your help!
There are a couple of Methods to Reset that Error. Usually Service is Required. In other Words, Most of the times it's Better to Invest in New Printer as the Cost of Repair is high relative to the Cost of the New One.
As you tried the above one, it Did not Work. There is One more Procedure :-
Press and HOLD all following buttons: Power, Load/Eject, Stop, B&W, Color. Continue to hold the buttons until "Init Eeprom" appears on the printer screen. Press Color button to clear protection counter.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
You would find this information in almost every Fior
Answers & Comments
Hi,
There are a couple of Methods to Reset that Error. Usually Service is Required. In other Words, Most of the times it's Better to Invest in New Printer as the Cost of Repair is high relative to the Cost of the New One.
As you tried the above one, it Did not Work. There is One more Procedure :-
Press and HOLD all following buttons: Power, Load/Eject, Stop, B&W, Color. Continue to hold the buttons until "Init Eeprom" appears on the printer screen. Press Color button to clear protection counter.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
You would find this information in almost every Fior