Hi, I'm trying to find out detail on the thermal fuse that connects to connector CN906 on the main internal circuit board of the VPL-CX6 projector. The connector (and fuse) is used to provide a switch line to the BALAST, which powers on the bulb. My projector is missing the fuse (someone has removed it) and the schematics do not give any details of the thermal fuses characteristics. If someone can provide the fuses details or even a photo of the main board inside the projector, showing the connector and what it connects to, that would be very helpful and much appreciated. I've managed to confirm the missing fuse is the problem by shorting the connector and the projector works fine, but I'd rather use the correct fuse as I expects it's used to protect the projector from a faulty or had-it bulb. Thanks in adavance. Regards, Markus

Office Equipment & Supplies - Sony - VPL-CX6 Multimedia Projector