spa control system to operate. Further, it seems that the igniter is taking too long to ignite the burners, as the pop from the flame surge seems much bigger. ideas?????????? thanks alan
Pool & Spa - Hayward - H Series Pool & Spa Heater 400k Btu Propane Gas Milivolt...
This front panel is a seperate part from thr board and should be replaced if it is alowing water into the unit and cause more costley repairs. The slow start is probally clogs in the gas orfaces in the main gas header. You will need a small wrench to unscrew these to clean them. You should start with the ones closest to the main burner; (The one with the ignitor or pilot connected to it). Good luck.
Answers & Comments
This front panel is a seperate part from thr board and should be replaced if it is alowing water into the unit and cause more costley repairs.
The slow start is probally clogs in the gas orfaces in the main gas header. You will need a small wrench to unscrew these to clean them. You should start with the ones closest to the main burner; (The one with the ignitor or pilot connected to it). Good luck.