Spa does not heat
I have the below listed Spa pump & heater . No matter how long or what temp I set the water remains cold.
Can this problem be reapired at a reasonable cost or is it better to purchase a new one?
Acura Power Station Model#ST115ODP40G-17-AP-F
60 HZ
240 HP
6000 Watts
40 AMP
Thansk,
Ben
Pool & Spa - RTO - Pump Volute, Acura, Maverick,No IMP
Answers & Comments
Probably the same question but just in case...
First, test to see if power is getting to the element lead posts. You should have 230 VAC there if the heater is trying to work. If so, your element is bad and will need to be replaced. If not you will need to determine if a limit switch is tripped or bad, if the pressure switch is closing, and if the inline fuse has blown. Any one or combination of those failures will cause the heater to remain off.
If this answer does not fix your problem, please comment with additional details prior to rating the answer. Positive feedback is appreciated once your problem is solved!
John