Hi I would set it at 0.025 inch (25 thou) or 0.6 mm. Do know your make and model but most small 2 stroke motors run fine at this setting. Regards Jacko from down under
Thanks Jacko frm Austraia. I shortened the gap, and boom, runs like a new one. Thanks Jacko frm Austraia. I shortened the gap, and boom, runs like a new one.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Hi
I would set it at 0.025 inch (25 thou) or 0.6 mm.
Do know your make and model but most small 2 stroke motors run fine at this setting.
Regards
Jacko from down under
Thanks Jacko frm Austraia. I shortened the gap, and boom, runs like a new one.