After the lines are cleaned out with fresh water, then try to spray with fresh water and then it should work with your liquid fertilizer or herbicide without a problem.
Another problem that people overlook is leaving the herbicide or fertilizer in the tank over the winter.
Please don't do this, as it can gum up the nozzle tip.
Instructions state that it should be stored without any fluid in the tank over the winter time.
Have a good day.
After the lines are cleaned out with fresh water, then try to spray with fresh water and then it should work with your liquid fertilizer or herbicide without a problem.
Another problem that people overlook is leaving the herbicide or fertilizer in the tank over the winter. Please don't do this, as it can gum up the nozzle tip.
Instructions state that it should be stored without any fluid in the tank over the winter time.
Answers & Comments
Sprayer spits- Is this a water sprayer of some sort, hand held model or a sprinkler?
Or, is it a paint gun?
Anyway, if either spits, the control may not be rotated to an optimal spray pattern.
Feel free to get back to me on this.
Gilmour Manufacturing has its factory in Somerset, PA, my home town.
After the lines are cleaned out with fresh water, then try to spray with fresh water and then it should work with your liquid fertilizer or herbicide without a problem.
Another problem that people overlook is leaving the herbicide or fertilizer in the tank over the winter.
Please don't do this, as it can gum up the nozzle tip.
Instructions state that it should be stored without any fluid in the tank over the winter time.
Have a good day.
tried all your suggestions still same problem.