SR125 Clutch lever awkward for a small hand to operate
The span on the clutch lever of my daughters Yamaha SR125 is too wide for her small hands.I wondered if a straighter or smaller span lever from a different bike might fit.The bike has the Yamaha issue non adjustable lever which has a very wide curve toward the end.Any idea of an alternative.Thanks.
Motorcycles - Triumph - Tiger - 2004 Triumph Tiger
Answers & Comments
If you change the leaver to a flater one you may fine that the cluch dont fully disengage and as its made of cheep aluminium it may not bend easly without braking unless you get it hot the only thing i can think of is let the cluch cable off a bit it will have to much slack on it but the leaver will come in a bit you could still pack out the slack on the handel bars if there is no ajuster on the cable you will need to cut away a bit of the outer cable to give you the slack,,
but if this dont work it will mean you need a new cable or fit in an ajuster