Start and dies, codes p061f, p2106,p2104,p2111
Was going down the road wrench light came on and it died. you can unplug either the tps or the throttle actuator and it will start but run bad and only idle
Cars & Trucks - Ford - Crown Victoria - 2005 Ford Crown Victoria
Answers & Comments
Code p2106 refers to throttle actuator control (TAC) system--limited power mode===causes ---wiring---TAC motor---APP sensor---ECM
code o2104 refers to TAQC systems ---forced idle mode===causes wiring---TAC motor--APP sensor--ECM
code p2111 refers to TAC system --actuator stuck open ==causes ---throttle body--throttle valve tight/ sticking
code p2111 also refers to TAC system --circuit malfunction==causes wiring---short to positive--short to ground---TP sensor---ECM
code p2111 also has a 3rd section---brake vacuum---implausible signal===causes---wiring---vacuum sensor--mechanical fault