Report "Starter problem My 2001 diablo VT. i turned off the vehicle and the vehicle did not start. i was unable to restart the car. i checked voltage at the starter and got 11.2 volts. I checked voltage at the exciter wire to the starter when activation to start the vehicle was applied i got 11.0 volts but no movement to the starter. i did not even hear the solenoid click. i removed the starter. i took the strater to a rebuild company who stated normally the starter cannot be rebuilt because BOSCH has the rights to new starter from the dealer replacement only. The rebuild company opened the starter and I saw the bruches all gone with only powder there. I had the starter rebuilt. I reinstalled the starter to the vehicle and still the car wort start. again I verified the starter and exciter wire has about 10.9 volts. I checked the starter relay, all fuses, and I still cannot start the vehicle. I did notice when I attempt to start the vehicle the selonid gets warm but still wont start. I bypass the selonid and the starter spins free but without the selonid the gear will not expell to make contact with the flywheel . can anyone help"