A failed inlet valve is not uncommon in F&P machines. The hot valve is different to the cold one, so don't exchange them. Not a big job for a tech to do in-laundry. Good luck....Nomess
Fisher & Paykel GW708\r\nWashing machine stops and starts filling then starts beeping and the long wash light 1 and the 7th light are lit up. If I turn off the power I can restart and eventually fill machine but it will error again when it needs to fill up again. Please help.
Answers & Comments
I ahve the ame problem, but the machine also stops and starts when its trying to empty after the last rinse cycle and begging of spin cycle?
A failed inlet valve is not uncommon in F&P machines. The hot valve is different to the cold one, so don't exchange them. Not a big job for a tech to do in-laundry. Good luck....Nomess
Fisher & Paykel GW708\r\nWashing machine stops and starts filling then starts beeping and the long wash light 1 and the 7th light are lit up. If I turn off the power I can restart and eventually fill machine but it will error again when it needs to fill up again.
Please help.