Solution 1 will get you close if the saw dosn't work but Solution 2 is the final fix for all saws. Once the saw is running I fine tune it under a load. I usually set a few pieces of wood 12"dia aside for testing. I start a slice close to the end about an inch deep or just deep enough to keep to saw from jumping too badly. While cutting as much as possible without stalling and the throttle wide open I tune high mix (H). There might be some risk since I am not using both hands to hold the saw but I anticipate the worst and keep my face and body away from the plane of the saw blade. Low mix is just a balencing act between the lowest you can set mix and throttle stop and still keep the saw running without the chain moving or aid from the trigger. I've been able to turn some small saws (and others) into monsters and that's what we're after!
check the plug and the wires going to the switch and the coil. if still no spark u need a new coil.check the plug and the wires going to the switch and the coil. if still no spark u need a new coil.
Answers & Comments
I have a stihl ms 180 that leaks bar oil all the time
Hi
STIHL MS 170,MS 180 H;L;T(together)2 turns
STIHL MS 210,MS 230,MS 250,MS 260,MS 290,MS 310,MS 340,
MS 360,MS 361,MS 390,MS 440,MS 460,MS 660 H=1turn,L=1 turn,T adjust
STIHL MS 270,MS 280,H=3/4 turn,L=1 turn,T adjust
cheers savumihai71
Solution 1 will get you close if the saw dosn't work but Solution 2 is the final fix for all saws. Once the saw is running I fine tune it under a load. I usually set a few pieces of wood 12"dia aside for testing. I start a slice close to the end about an inch deep or just deep enough to keep to saw from jumping too badly. While cutting as much as possible without stalling and the throttle wide open I tune high mix (H). There might be some risk since I am not using both hands to hold the saw but I anticipate the worst and keep my face and body away from the plane of the saw blade. Low mix is just a balencing act between the lowest you can set mix and throttle stop and still keep the saw running without the chain moving or aid from the trigger. I've been able to turn some small saws (and others) into monsters and that's what we're after!
I have a Stihl ms361 chainsaw that won't give no spark. How can I fix the problem
check the plug and the wires going to the switch and the coil. if still no spark u need a new coil.
My 260 stihl pro is giving me trouble with a lot of oil leak. It doesn't have strength, when I try to cut with it, it just goes off.
There is no set setting..you just have to adjust according to ur chainsaw..every chainsaw is different.