Stopped working After hooking everything up, I placed robotic pool vacuum in pool and turned it on. It worked for 30 seconds and then stopped. I turned unit off for 10 minutes and then tried it again. This time it didn't work at all
Pool & Spa - Dolphin - Maytronics Diagnostic Robot Cleaner
Try a self test...Flip the unit upside down on the ground, tracks 'up towards the sky' and trun it on. It should run for about 30 seconds during which it will cycle through various track and impeller motions.
If it completes the test, try it in the water again.
If not, contact us at www.arrowmotor.net for service arrangements or parts. You can also try Maytronics direct at www.maytronicsus.com.
Answers & Comments
Try a self test...Flip the unit upside down on the ground, tracks 'up towards the sky' and trun it on. It should run for about 30 seconds during which it will cycle through various track and impeller motions.
If it completes the test, try it in the water again.
If not, contact us at www.arrowmotor.net for service arrangements or parts. You can also try Maytronics direct at www.maytronicsus.com.