Hello Your TV has mistuned with improper remote entry. Set it reset to factory settings. To set it to factory settings, do the following. Using the "POWER button on the front panel or remote control, cycle the power off and back on again. When the front panel LED displays "boot", press these buttons in a sequence: "UP, DOWN, BACKWARD ARROW" and " MENU-SELECT". The Receiver will be reset as the default status automatically. Use the default password "0000" to access the Lock menu and set a new password. Be sure to repeat your channel Auto Scan before using the receiver. ok
Using the "POWER button on the front panel or remote control, cycle
the power off and back on again. When the front panel LED displays
"boot", press these buttons in a sequence: "UP, DOWN, BACKWARD ARROW" and
" MENU-SELECT". The Receiver will be reset as the default status
automatically.
Use the default password "0000" to access the Lock menu and set a
new password. Be sure to repeat your channel Auto Scan before using the receiver. ok
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Hello
Your TV has mistuned with improper remote entry. Set it reset to factory settings. To set it to factory settings, do the following.
Using the "POWER button on the front panel or remote control, cycle
the power off and back on again. When the front panel LED displays
"boot", press these buttons in a sequence: "UP, DOWN, BACKWARD ARROW" and
" MENU-SELECT". The Receiver will be reset as the default status
automatically.
Use the default password "0000" to access the Lock menu and set a
new password.
Be sure to repeat your channel Auto Scan before using the receiver.
ok