No transmission. get the shop manual and read? the trans has clutch pack for engine then a drive belt. it is CVT drive, (the pulley magic box) id check cables first for shifting not too much slack. the CVT can not go in reverse. so the reverse /forward is downstream from the CVT. and not wheel bearings, it is this shift box, issue. or just a bad cable, to it etc. are you really owning this> (400 only seems wrong) 2008 Suzuki LT-Z400 . eiger 400, or
if the clutch fails and drags it will not want to shift easy or the cable is bad, or not adusted, right it can not shift right look for simple things first like this, if it does not go forward make sure FIRST the cable even goes to forward mode. (at the end of the cable)
Answers & Comments
No transmission.
get the shop manual and read?
the trans has clutch pack for engine then a drive belt.
it is CVT drive, (the pulley magic box)
id check cables first for shifting not too much slack.
the CVT can not go in reverse. so the reverse /forward is downstream from the CVT.
and not wheel bearings, it is this shift box, issue. or just a bad cable, to it etc. are you really owning this> (400 only seems wrong)
2008 Suzuki LT-Z400 . eiger 400, or
if the clutch fails and drags it will not want to shift easy
or the cable is bad, or not adusted, right it can not shift right
look for simple things first
like this, if it does not go forward make sure FIRST the cable even goes to forward mode. (at the end of the cable)