Hello , Try swapping the ram in the slots, or testing one stick at a time.
If the above solution didn't work for you check below
"E0" error to be fixed by swapping the DVI cable's position from the mobo port to the graphics card's port, Make sure your cpu cooler fan is connected to the cpu fan header. If non of these sulotions worked for you, make sure your sticks are seated all the way back. Also try using different sticks, if you have any lying around. Or borrow some from your friends. Hope one of these work for you
Answers & Comments
Hello ,
Try swapping the ram in the slots, or testing one stick at a time.
If the above solution didn't work for you check below
"E0" error to be fixed by swapping the DVI cable's position from the mobo port to the graphics card's port, Make sure your cpu cooler fan is connected to the cpu fan header. If non of these sulotions worked for you, make sure your sticks are seated all the way back. Also try using different sticks, if you have any lying around. Or borrow some from your friends.
Hope one of these work for you