Telephone ringing problem
In our office we have an old NorStar system with M7310 'phones. We had a power cut today for a while and when the power returned I had to reset the time and date on the 'phones. However, an incoming call only rings on one 'phone now whereas before the power cut it rang on all the 'phones. How can I reset the system so all the 'phones ring for an incoming call? Thanks.
Lands Phones - NorStar - M7310 Corded Phone
Answers & Comments
Okay first you'll need to know the 2 digit "Set" number for your Phone.
Press "Featire" *0 then Intercom to get the 2 digit number.
Okay Now we need to configure:
Press "Feature" **CONFIG or **266344
Press: Next until "Sets" appears "press Show" Top Right Button
Enter 2 digit "Set Number"
Press Next Until You Get Ringing Lines
Hit the "Change" Button to Turn the Line to "Yes" to ring
Do this for each Line you have that you want to ring.
Done, Please Rlease.
Sorry, but I just checked again, and no I did not miss a step.
When you enter **266344 the first thing that should appear is "Lines" hit the next arrow and "Sets" appears. I don't have any of the catagories that you are listing, sorry. I tried this on all 10 of our phones and the same thing happens, I even tried it on our other office across town and same thing. Sorry but I think you may have more problems with your config on your phone, then just the non ringing. When you type in **266344 the Main Catagories should be as follows, 1.Lines, 2. Sets, 3.Call Handling, 4.Restrictions & 5.Overides.