Television froze but when turned back on, the 1080i 60 Hz is flashing in the corner, no picture or sound
Picture froze, turned off and back on, but now no picture and the 1080i 60 Hz is flashing in the corner
Televison & Video - Proscan
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Do a factory reset to this set, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.