Tension settings juki mo-644d
Well I got it threaded, but any ideas on tension settings (ideal numbers)? I can't seem to get it right. Thanks.
Sewing Machines - Juki - MO-644D Mechanical Sewing Machine
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
-If the machine is threaded correctly and the thread is flossed into the tension discs,
-if the thread is high quality and not cheap thred
the top tensions should be at 5-6 and the looper tensions should be at 4-5
Be sure it is threaded correctly (follow the threading map on the inside of the front cover of machine
Also be sure you are using a size 14 or size 90 standard Schmetz needle do not use Klasse needles
as these are to short and affecdt the timing.
drtension