There should be several channel choices and speaker connections, make sure they both match. If you are not sure, put the amp on main or 1 and try all the connections until you find the ones that sound is being routed to. Also overload protection is pretty sensitive, if you have touched wires together or mixed up + and - you may have tripped it, and may need to reset.
I’m happy to assist further over the phone at https://www.6ya.com/expert/gregg_78ecbb34e27be215
Answers & Comments
There should be several channel choices and speaker connections, make sure they both match.
If you are not sure, put the amp on main or 1 and try all the connections until you find the ones that sound is being routed to.
Also overload protection is pretty sensitive, if you have touched wires together or mixed up + and - you may have tripped it, and may need to reset.
I’m happy to assist further over the phone at https://www.6ya.com/expert/gregg_78ecbb34e27be215