The blower is incredibly noisy and starts shaking when I turn it on. It just started doing this while I was using it, it was fine before that one moment
I would check and make sure there isnt debris in the impeller and that the impeller is tight. Also there may be 4 motor mount screws behind the impeller that have worked loose and are rubbing on the impeller- if so tighten with lock tite.
Answers & Comments
I would check and make sure there isnt debris in the impeller and that the impeller is tight. Also there may be 4 motor mount screws behind the impeller that have worked loose and are rubbing on the impeller- if so tighten with lock tite.