Report "The camera will only turn on after the battery has been removed and replaced. When it turns on (when unconnected from pc) the lens opens and moves out but then the camera just turns off. Nothing is displayed on the screen. The camera will not turn back on until the battery is removed and replaced. Then when its turned on again the lens just goes back into the camera and turns off again. This can be repeated and repeated with no change. When connected to the computer the camera can be turned on and a blank white screen appears with USB in the top left and the external memory can be accessed on the computer. When disconnected the camera returns to what it does as described above. Is there any chance you could help solve this problem as I am unable to use the camera at all. Kindest Regards Jon"