Hello there! It seems to me that while your device was connected to your USB it went into hibernation. Thus stopping supplying power to the device. That's why it's not being recognised probably. What to do? ...assuming you have XP Plug your device in the same USB you used for that device. Power your computer/after loading go to Device Manager/ expand Universal Serial Bus Controllers/ Go to USB root hub / Right-click/properties Now go to Power Management Tab/ uncheck (allow the computer to turn off...) Apply changes OK Restart Please rate this advice as it's very important for us. Good luck friend!
Answers & Comments
Hello there!
It seems to me that while your device was connected to your USB it went into hibernation. Thus stopping supplying power to the device. That's why it's not being recognised probably.
What to do? ...assuming you have XP
Plug your device in the same USB you used for that device. Power your computer/after loading go to Device Manager/ expand Universal Serial Bus Controllers/ Go to USB root hub / Right-click/properties
Now go to Power Management Tab/ uncheck (allow the computer to turn off...) Apply changes OK
Restart Please rate this advice as it's very important for us. Good luck friend!
Update or donwload drivers