The Drag on my 750ss does not work what could be the problem?
I have a penn 750 that the drag tightens up on its own. I unscrew the drag knob on the front to loosen the drag but when line is paying out the drag knob (on front of the reel) turns with the spool-tightening it down. Anyone out there know why this might be happening? Thanks, Robert
Fishing - Penn - Spinfisher 7500SS Saltwater Spinning Reel CP20B 7' 20lb....
Answers & Comments
This happens after you screw the drag too tight so that the plastic washer under the spool is pressed out. The fix is simple: cut excess of that washer and tighten properly.