In order to replace the belt on this unit you will need to pull the washing machine out to access the back panel of the washer. Your belt may not have broken, although if any wearing on the belt reccommend you replace it and make sure it fits properly in the groves on the motor to keep on the back wheel(pulley) of the after you rotate the drum from the wheel and make sure it is on, (you may need a ziptie to be removed before use. Rotate atleast 5 times with power off to make sure it is grooved properly. Replace service panel and return power.
Hope this helps. D&J Tech
Note: if this unit is still in warranty call a service tech. this may void any current or extended warranty.
Answers & Comments
Hi..you need a new belt.Replacing the old one
will solve the issue.
try this out..
thank u..
rate me..
In order to replace the belt on this unit you will need to pull the washing machine out to access the back panel of the washer. Your belt may not have broken, although if any wearing on the belt reccommend you replace it and make sure it fits properly in the groves on the motor to keep on the back wheel(pulley) of the after you rotate the drum from the wheel and make sure it is on, (you may need a ziptie to be removed before use. Rotate atleast 5 times with power off to make sure it is grooved properly. Replace service panel and return power.
Hope this helps. D&J Tech
Note: if this unit is still in warranty call a service tech. this may void any current or extended warranty.