The electrical features of my DCS 48-inch gas range will not come on. The power is on, however, the red nob lights, the ignitors and the oven lights will not come on. What is the issue?
The range surface element not heating or the oven not heating–or both? The relay control board could be at fault. Some ranges have a relay control board that's separate from electronic control board. The relay board has electrical relays that control voltage going to major loads such as the bake element or a surface element, based on signals from the control board.
Did you test the power with a Proximity power tester, or something else in the plug. If it has a direct contact, fused spur, check the fuse in it. Otherwise, something has failed! My research shows there are no internal fuses. Contact the maker direct.
Answers & Comments
The range surface element not heating or the oven not heating–or both? The relay control board could be at fault. Some ranges have a relay control board that's separate from electronic control board. The relay board has electrical relays that control voltage going to major loads such as the bake element or a surface element, based on signals from the control board.
Did you test the power with a Proximity power tester, or something else in the plug. If it has a direct contact, fused spur, check the fuse in it. Otherwise, something has failed! My research shows there are no internal fuses. Contact the maker direct.
https://www.dcsappliances.com/us/help-and-support
..