The entire heatsink and all the output transistors are missing from my qsc MX 1500a amplifier, I need to know the transistors and which is N P N and which is PNP and information of which goes where
You have a high power amplifier and the work you propose leaves no room for either error or compromise. If, as you suppose, the output is by complementary pair, the transistors must be matched pairs providing equal gain characteristics.
Unless you have seen inside a complete amplifier of the type you are only guessing at the output stage(s) that could be by module or a multiple transistor output. There also might be other driver stage(s) sharing the same heat sink.
The least you will need is a service manual and an internet search produced a number of results on the below link.
Answers & Comments
You have a high power amplifier and the work you propose leaves no room for either error or compromise. If, as you suppose, the output is by complementary pair, the transistors must be matched pairs providing equal gain characteristics.
Unless you have seen inside a complete amplifier of the type you are only guessing at the output stage(s) that could be by module or a multiple transistor output. There also might be other driver stage(s) sharing the same heat sink.
The least you will need is a service manual and an internet search produced a number of results on the below link.
https://www.google.co.uk/search?rlz=1C1CAFB_enGB673GB676&ei=PtG_W56NM6mIgAaYwaqIDg&q=qsc+mx1500a+service+manual&oq=qsc+MX+1500a+amplifier&gs_l=psy-ab.1.3.0i71k1l8.0.0.0.32505.0.0.0.0.0.0.0.0..0.0....0...1..64.psy-ab..0.0.0....0.D6yNqkAW5nw