The lights work intermittently and sometimes don't work at all on my Whistler 9mm inspection camera. How to fix?
The led lights on my inspection camera were working for part of a day and then quit working. A few hours later they were working again. Then they quit working all together. The batteries were good but I changed them anyway. The camera works fine. It is brand new. I got it for Christmas as a gift but can't get a receipt to exchange it. Is there a possible fix. I checked for continuity and voltage, but I don't have a wiring diagram so I can troubleshoot correctly. Customer Service was no help at all. Thanks.
Heating & Cooling - Whistler - 9mm Wireless Inspection Camera
Answers & Comments
I guess you will need to open the case up from the panel where the lights are visible. If you can, look for loose connections to the leds or the wires from the leds to the rest of the panel...good luck!
It appears that you will probably have to replace the gooseneck extention either under warantee or just purchase it. Please go the the following website for the information you need:
Sorry...here it is:To speak with a Customer Service Representative Call: 1-800-531-0004 or 479-273-6012 or via Live Chat.