The monitor switches on and shows benq logo, then screen goes black.Tested on 2 computers and still not working. Have changed capacitors on board but still nothing
After changing the caps, do you get steady 12~18vdc feeding the inverter circuits? Inverter fuse OK? It can be bad transformers, or lamps also. Pictures will be great help. See where I post my pictures: http://s807.photobucket.com/home/budm/allalbums
I have the same problem. Screen comes on for about 2 secs then goes black. No visible bulging or leaking caps. Tried removing the main filtering cap (120uF, 450V) and got the same response, only quicker. Inverter circuits have 19V around them, which drops to 18 during the 2 seconds of screen time, then goes back to 19. Any suggestions anyone ?I have the same problem. Screen comes on for about 2 secs then goes black. No visible bulging or leaking caps. Tried removing the main filtering cap (120uF, 450V) and got the same response, only quicker. Inverter circuits have 19V around them, which drops to 18 during the 2 seconds of screen time, then goes back to 19. Any suggestions anyone ?
I have the same problem. Screen comes on for about 2 secs then goes black. No visible bulging or leaking caps. Tried removing the main filtering cap (120uF, 450V) and got the same response, only quicker. Inverter circuits have 19V around them, which drops to 18 during the 2 seconds of screen time, then goes back to 19. Any suggestions anyone ?I have the same problem. Screen comes on for about 2 secs then goes black. No visible bulging or leaking caps. Tried removing the main filtering cap (120uF, 450V) and got the same response, only quicker. Inverter circuits have 19V around them, which drops to 18 during the 2 seconds of screen time, then goes back to 19. Any suggestions anyone ?
Answers & Comments
After changing the caps, do you get steady 12~18vdc feeding the inverter circuits? Inverter fuse OK? It can be bad transformers, or lamps also. Pictures will be great help. See where I post my pictures: http://s807.photobucket.com/home/budm/allalbums
I have the same problem. Screen comes on for about 2 secs then goes black. No visible bulging or leaking caps. Tried removing the main filtering cap (120uF, 450V) and got the same response, only quicker. Inverter circuits have 19V around them, which drops to 18 during the 2 seconds of screen time, then goes back to 19. Any suggestions anyone ?
I have the same problem. Screen comes on for about 2 secs then goes black. No visible bulging or leaking caps. Tried removing the main filtering cap (120uF, 450V) and got the same response, only quicker. Inverter circuits have 19V around them, which drops to 18 during the 2 seconds of screen time, then goes back to 19. Any suggestions anyone ?