If you changed the oil recently you need to use SAE30 and not 10w30. Causes pressure buildup.
Your mixture of oil to gas if 2 stroke is too high, plug not burning hot enough, wrong plug, ignition timing needs to be slightly retarded, mixture too rich. Those are some of the causes.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
If you changed the oil recently you need to use SAE30 and not 10w30. Causes pressure buildup.
Your mixture of oil to gas if 2 stroke is too high, plug not burning hot enough, wrong plug, ignition timing needs to be slightly retarded, mixture too rich. Those are some of the causes.