NAT STRICT Step 1 : Connect - Router - Computer ( Wired )Step 2 : Open Router setup by typing http://192.168.0.1 on the address bar of internet explorerStep 3 : Click LoginStep 4 : On the Left Click AccessStep 5 : Choose DMZStep 6 : Click Enable ... And Assign the IP Address of the Xbox /PS3/Wii in itStep 7 : Click ApplyStep 8 : Unplug the Power cord from the router and turn Off XBOX /PS3/WiiStep 9 : Plug the power cord back to the router and wait till the lights are SolidStep 10 : turn On the Xbox/PS3/WiiStep 11 : Test the ConnectionStep 12 : If Still the Same ..Step 13 : On the Left under Access Click Firewall RulesStep 14 : Disable it and ApplyStep 15 : Do Steps 8 through 9Step 16 : Test the Connectionlet me know if this worksRegardsTOM
I have the same problem. There's no where to click under "Firewall Rules". I have the same problem. There's no where to click under "Firewall Rules".
I see that this is kind of an old post, but it worked for me, I just had to do steps 1 - 11 - Thanks Tom for the information I see that this is kind of an old post, but it worked for me, I just had to do steps 1 - 11 - Thanks Tom for the information
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
NAT STRICT
Step 1 : Connect - Router - Computer ( Wired )
Step 2 : Open Router setup by typing http://192.168.0.1 on the address bar of internet explorer
Step 3 : Click Login
Step 4 : On the Left Click Access
Step 5 : Choose DMZ
Step 6 : Click Enable ... And Assign the IP Address of the Xbox /PS3/Wii in it
Step 7 : Click Apply
Step 8 : Unplug the Power cord from the router and turn Off XBOX /PS3/Wii
Step 9 : Plug the power cord back to the router and wait till the lights are Solid
Step 10 : turn On the Xbox/PS3/Wii
Step 11 : Test the Connection
Step 12 : If Still the Same ..
Step 13 : On the Left under Access Click Firewall Rules
Step 14 : Disable it and Apply
Step 15 : Do Steps 8 through 9
Step 16 : Test the Connection
let me know if this works
Regards
TOM
I have the same problem. There's no where to click under "Firewall Rules".
I see that this is kind of an old post, but it worked for me, I just had to do steps 1 - 11 - Thanks Tom for the information