The Proform Zt3 treadmill causes my DSL (WIFI) modem to go offline even when the modem is being run on battery. Is there a way to fix this? I called the company and they couldn't provide any answer
Move the TM away from the router. or neuter the TM wifi, inside, pull card, or antenna. inside. or warp the TM wifi box in aluminum foil (faraday shield magic)
if you shield that wifi modem that kills dead the whole house for wifi.
move the router or TM, or shield or neuter the TM wifi card. To renderineffective or powerless: meaning 2 websters.
wifi is RADIO and as such RADIO cures work. distance (either or both) disablement.(TM end) shields. (TM end) 1,2,3, all work. every one works. I am licensed by FCC. so ... there go.
good luck to you,, wifi is a big pain if you have RFI issues. like baby monitors or old landline portables near. one trick if source is not know, is to trip breaks room by one to find the offender. then when that is found pull cords.good luck to you,, wifi is a big pain if you have RFI issues. like baby monitors or old landline portables near. one trick if source is not know, is to trip breaks room by one to find the offender. then when that is found pull cords.
If the treadmill produces that much RFI that it interferes with your modem, the ONLY thing you can try is shielding of the modem - https://www.instructables.com/id/Shield-Your-Wireless-RouterModem-From-RF-Energy
Answers & Comments
Move the TM away from the router.
or neuter the TM wifi, inside, pull card, or antenna. inside.
or warp the TM wifi box in aluminum foil (faraday shield magic)
if you shield that wifi modem that kills dead the whole house for wifi.
move the router or TM, or shield or neuter the TM wifi card.
To render ineffective or powerless: meaning 2 websters.
wifi is RADIO and as such RADIO cures work.
distance (either or both)
disablement.(TM end)
shields. (TM end)
1,2,3, all work. every one works.
I am licensed by FCC. so ... there go.
Thank you for your suggestion!
good luck to you,, wifi is a big pain if you have RFI issues. like baby monitors or old landline portables near.
one trick if source is not know,
is to trip breaks room by one to find the offender. then when that is found pull cords.
If the treadmill produces that much RFI that it interferes with your modem, the ONLY thing you can try is shielding of the modem -
https://www.instructables.com/id/Shield-Your-Wireless-RouterModem-From-RF-Energy
Thank you for your suggestions.