The S9 has been unused for three months and I cannot get it to get water to the brewer. It keeps telling me to fill the water and press the steam button. No such luck. Is there a way to prime this machine?
Hello This is a common problem and there`s usually only 1 thing you can try to do yourself. Use luke warm water in the watertank and repeat the fill system procedure 4-5 times. If this doesn`t help, try to shut down the machine and try the same after 30 minutes. If nothing happens after you tried this a few times, then theres a problem with the solenoid valve for steam, and this need to be changed. That`s something you need help from a technician for.
I had the same problem as I just got the machine used, and don't know how long its been sitting. I took off the top and left side panels and found one of the water tubes going to the steam control clogged. The plastic hoses are soft so pull on them carefully. There well be a brass fitting with an 'O' ring.I had the same problem as I just got the machine used, and don't know how long its been sitting. I took off the top and left side panels and found one of the water tubes going to the steam control clogged. The plastic hoses are soft so pull on them carefully. There well be a brass fitting with an 'O' ring.
Did you try to clean the tube or order a new one. Where did you get it from? I seem to have the same issue.Did you try to clean the tube or order a new one. Where did you get it from? I seem to have the same issue.
Answers & Comments
Hello
This is a common problem and there`s usually only 1 thing you can try to do yourself. Use luke warm water in the watertank and repeat the fill system procedure 4-5 times. If this doesn`t help, try to shut down the machine and try the same after 30 minutes. If nothing happens after you tried this a few times, then theres a problem with the solenoid valve for steam, and this need to be changed. That`s something you need help from a technician for.
I had the same problem as I just got the machine used, and don't know how long its been sitting. I took off the top and left side panels and found one of the water tubes going to the steam control clogged. The plastic hoses are soft so pull on them carefully. There well be a brass fitting with an 'O' ring.
Did you try to clean the tube or order a new one. Where did you get it from? I seem to have the same issue.