Try an auto search with the remote, you might have already tried it :
1. presstv
2. press select and the red button simultaneously untill the LED light flashes twice
3. Then keep pressing the TV and Standby buttons one after the other (not at same time) until the tv swithches off, then press select to store the code, the LED should flash twice to confirm this.
Once you have the remote working the TV, you can get the remote blink back the TV code so you can write it down for future reference.
Press the TV button on the Sky remote
Hold down Select and the Red buttons together for approximately two seconds until the LED blinks twice
Key in 9, 9, 0
Key in 1 on the numeric keypad and count the number of times the Red LED blinks. This is the 1st digit.
Answers & Comments
Try an auto search with the remote, you might have already tried it :
- Press the TV button on the Sky remote
- Hold down Select and the Red buttons together for approximately two seconds until the LED blinks twice
- Key in 9, 9, 0
- Key in 1 on the numeric keypad and count the number of times the Red LED blinks. This is the 1st digit.
- Repeat for 2 and 3
- Note: no Blink = 0 (zero)
1. press tv
2. press select and the red button simultaneously untill the LED light flashes twice
3. Then keep pressing the TV and Standby buttons one after the other (not at same time) until the tv swithches off, then press select to store the code, the LED should flash twice to confirm this.
Once you have the remote working the TV, you can get the remote blink back the TV code so you can write it down for future reference.