The spark won't catch! The pump is on and there is plenty of pressure. It makes the noise for the spark but no spark, and no gas to heat the water. Created by chopks. Pool & Spa - Raypak - Rp2100 Pool & Spa Heater Lonox 407k Btu Natural Gas Polymer...

The spark won't catch! The pump is on and there is plenty of pressure. It makes the noise for the spark but no spark, and no gas to heat the water

February 2021 1 4 Report

The spark won't catch! The pump is on and there is plenty of pressure. It makes the noise for the spark but no spark, and no gas to heat the water

Pool & Spa - Raypak - Rp2100 Pool & Spa Heater Lonox 407k Btu Natural Gas Polymer...

Answers & Comments

Anonymous

First check that you have gas.if a tank was just filled the line may be full of air.check that there are no obstructions at the pilot assembly.

Answers & Comments

Helpful Links

Helpful Social