The turntable was a gift for my son and it worked once. Now, it isn't responding to anything. We've checked the belt and it seems to be installed correctly. What now?
Hi, there are not much electronic circuit for controlling the mechanism. all mecanical movements. there are only switches to sense staring and ending. remove the power and do the following
while holding the tone arm in its rest position, slowly turn the platter by hand clock wise at least 10 rotation to clear the machanism's automatic cycle.
Answers & Comments
Hi,
there are not much electronic circuit for controlling the mechanism. all mecanical movements. there are only switches to sense staring and ending. remove the power and do the following
while holding the tone arm in its rest position, slowly turn the platter by hand clock wise at least 10 rotation to clear the machanism's automatic cycle.
the connect the power and press start.
ok