Theater" picture screen. I went to the OSD links (menu button) and tried for Setup, and I could not enter the "IRC" and "Standard" links to get a picture. No go. Now I have no picture, and cannot link up to the OSD. I've tried the TV's Power Button, the "Source" Button, and the blue light just goes off. The remote just doesn't seem to do anything either, Any assistance??
Televison & Video - Olevia - LT32HVM 32 in. LCD Television
Hi, replace main board of tv to fix the problem as it sounds static charge of storm damaged the sensitive parts on main board. Main board has all inputs, tuner etc. Check Shop Jimmy for required main board availability by entering tv mode number. Let me know model number of tv if you have additional question. Thanks.
Thanks for using FixYa.From what you have described it seems the issue is with the power board or the main board and we'll need to check few things. When you open the unit up; take a look at the power board-the board where the power cords/plugs goes into. You might see some filter capacitors a little bulged up in the top-If this is the case-this is your defective part(you can try to replace them-but some soldering equipment is needed). If not, then probably the main board has gone bad. This is the other board-where all the inputs are going into. All this is only recommended if you have electrical expertise and know how to solder/re-solder components. Please note that the TV components consists high voltages even when in off position. Please accept the solution if the issue is resolved or post a comment for further assistance.
Answers & Comments
Hi,
replace main board of tv to fix the problem as it sounds static charge of storm damaged the sensitive parts on main board.
Main board has all inputs, tuner etc. Check Shop Jimmy for required main board availability by entering tv mode number.
Let me know model number of tv if you have additional question.
Thanks.
Hi
Thanks for using FixYa.From what you have described it seems the issue is with the power board or the main board and we'll need to check few things. When you open the unit up; take a look at the power board-the board where the power cords/plugs goes into. You might see some filter capacitors a little bulged up in the top-If this is the case-this is your defective part(you can try to replace them-but some soldering equipment is needed). If not, then probably the main board has gone bad. This is the other board-where all the inputs are going into. All this is only recommended if you have electrical expertise and know how to solder/re-solder components. Please note that the TV components consists high voltages even when in off position. Please accept the solution if the issue is resolved or post a comment for further assistance.
Thanks
Rylee
First get the splitter checked and then your TV.