Thermos spa concord deluxe Hot tub lcd panel lights don't come on at night
We can see the LCD control panel during the day and it works, but at night it isn't lit up to see what buttons we're pushing to use the Spa. Is there an led light burned out or something else like a loose wire from dropping the heavy water logged cover on it?
Pool & Spa
Answers & Comments
If your spa control system has "Balboa" as the system control mfg'r, then the most likely answer to your question is "Yes". Burned out Light bulbs. Very easy to replace. Your only tool needed, will be a "Dime".
If you have a Balboa, then (I lied, you will also need a flat blade screwdriver) take a screwdriver and pry carefully, the panel off of the spa lip.
Once off, Turn the panel upside down - you will probably see two each, on each end, bottom sides of the very small light bulbs with a slot in them.
To remove them, use the dime and only a quarter turn counter clockwise will remove them.
Picture attached to see what you are looking for.
Good Luck