Thought I wired leviton 5224 correctly, but looks like switch for fan is ok, but the only time light switch works is when fan runs also, so must keep light always on. What can be wrong?
Electrical Supplies - Leviton
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
You wired it wrong--- power to switch common positive with jumper then top out to fan - fan return [neutral ] to power in line ground ----other switch terminal or bottom out to light --light return [neutral ] to power inline ground so should have 3 lines wire nutted together for ground or neutral --and 3 wires on switch
It's two single pole switches with a removable jumper on one side. With jumper intact, you connect the hot feed to a either screw of the jumper which I belive are brass colored screws.
Then the two induvidual switch poles are the silver screws. Connect fan motor to one and fan light to the other.
If that doesnt work for you, take a picture of the switch and connections and another of wires in fan box and post here.