You can look up one in the Valve Assy Cover (you will need to take the cover out), then you can see the Valve Pulley. It has marking for ATG Peaking, which many may called it Top Dead Center (TDC).
Find Spark Plug #1, then remove all spark plugs out of the engine. Place a long plastic straw into the center of Spark Plug #1's hole. Now, get the large socket with a ratchet wrench and place on the Crankshaft Pulley. Turn the Crankshaft Pulley you see the long plastic straw going down & then up. Mark with a marker when the straw is at its peak (ATG Peak).
Answers & Comments
You can look up one in the Valve Assy Cover (you will need to take the cover out), then you can see the Valve Pulley. It has marking for ATG Peaking, which many may called it Top Dead Center (TDC).
Find Spark Plug #1, then remove all spark plugs out of the engine.
Place a long plastic straw into the center of Spark Plug #1's hole.
Now, get the large socket with a ratchet wrench and place on the Crankshaft Pulley.
Turn the Crankshaft Pulley you see the long plastic straw going down & then up.
Mark with a marker when the straw is at its peak (ATG Peak).