Toro 2000 commercial Z Master will not crank. Interlock switches good. . Battery and solenoid inew. Hear one click when turned to start position. can start mower by jumping battery leads at solenoid
Make sure your solenoid is grounded and that the negative battery cable is well grounded also. if those are ok, you can trace the little wires from the solenoid back to the switch and make sure there are no breaks. There are many safety switches in zero turns that could be the problem... don't take this personally but make sure your PTO switch is off. ??
Answers & Comments
Make sure your solenoid is grounded and that the negative battery cable is well grounded also.
if those are ok, you can trace the little wires from the solenoid back to the switch and make sure there are no breaks. There are many safety switches in zero turns that could be the problem... don't take this personally but make sure your PTO switch is off. ??