Touchscreen After performing a Sync, the TX is not responding to touchscreen any longer. Keep resetting the touchscreen and this feature is also giving a problem. Tried resetting the Tx on several occasions sometimes the problems goes away but only until the next Sync Tony
I had a similar same problem. It occured when pluging or unpluging in the USB cable into the bottom of the Palm TX when the other end of the cable was already pluged into a live USB port on my PC. The solution was to make sure the cable is unpluged first from your PC before you plug or unplug the cable into the bottom of your Palm TX.
Answers & Comments
I had a similar same problem. It occured when pluging or unpluging in the USB cable into the bottom of the Palm TX when the other end of the cable was already pluged into a live USB port on my PC.
The solution was to make sure the cable is unpluged first from your PC before you plug or unplug the cable into the bottom of your Palm TX.