Some things to try: 1. make sure the safety key is plugged in 2. make sure you can move the belts by hand, that nothing is seized up 3. make sure the i/o cables running from the console, through the upright, and back to the control board, are all connected together securely and have not been damaged. 4. make sure the red and black motor wires are connected to the the control board.
Answers & Comments
Some things to try:
1. make sure the safety key is plugged in
2. make sure you can move the belts by hand, that nothing is seized up
3. make sure the i/o cables running from the console, through the upright, and back to the control board, are all connected together securely and have not been damaged.
4. make sure the red and black motor wires are connected to the the control board.
I have tried all these things but still get error code