Troy bilt horse pto clutch will not disengage
My horse III was working fine until I changed the tines. The tine lever never fully went into disengage; but, the tines would stop. Now the tines always are engaged and the lever will not move either way. Any help would be appreciated.
Garden - Troy-Bilt - Pony Garden Tiller
Answers & Comments
The problem is lack of lubrication in the pto coupling. Losen the two swing bolts carefuly,block the front under the motor. Separate the tine transmision from the housing and grease both sides with as much grease as you can work in. Work the lever as you do this. Should fix the problem.