Truck won't start, after installing Kenwood DVD player
I installed my dvd player in my truck, and had some issues with it, so I ended up taking out the radio/dvd player. Now I can get my truck to start. I have checked fuses, replaced the ones I could not check. I did not cut any wires, but I cant seem to get power to the starter any suggestions?
Car Audio & Video - Kenwood - KVT-817DVD DVD/CD/MP3/WMA 7" Motorized In-dash Monitor With...
Answers & Comments
First and easiest is to check the starter relay in your fuse box under the dash and there could be a fuse box in the engine bay find the ignition one and change with another relay (best use the wipers relay)
I know you are saying you did not cut any wires but you may have knocked one causing it to come undone or cut a wire or pulled one out by accident.
If this all fails try disconnect the DVD player to check if car starts.
Let me know if this helps.
Regards Craig