Trying to figure out the required positioning of the blend doors in a 2007 dodge dakota
I had to replace the evaporator core for vehicle. some how the blend doors got out of position and now the air will not escape the vents. please help
Cars & Trucks - Dodge - Dakota - 2007 Dodge Dakota Quad
Answers & Comments
Does it have an electric control actuator ? An it's mode door not blend door . Mode door controls where air comes out of , defroster , vent , floor etc... an the blend door controls the temp. Pull the mode door actuator an see if the door move's freely , not binding . After replacing an evaporator if everything was put back right you shouldn't have this kind of problem . There is no relearn for the door actuator . Double check your work is the best answer anyone could give !