The pass code for pairing the headset is four zeros (0000).
Sending the entire procedure for pairing your Jabra to the cellphone:
1. Power the BT8010 headset off. To do this slide the on/off/pairing button to the off position. The display screen will be blank. 2. Slide and hold the on/off/pairing button forward until the display indicates “Pairing Mode”, then release. This may take up to 10 seconds. 3. Go into the Bluetooth menu on your cell phone and follow the cell phone’s instruction guide for pairing a Bluetooth headset. This generally involves going into a “devices” or “hands free” menu and adding a new device. Your phone may ask if you want to pair with the headset, accept by pressing “yes” or “OK” and confirm with the passkey or PIN 0000 (4 zeros).
Answers & Comments
Hi,
The pass code for pairing the headset is four zeros (0000).
Sending the entire procedure for pairing your Jabra to the cellphone:
1. Power the BT8010 headset off. To do this slide the on/off/pairing button to the off position. The display screen will be blank.
2. Slide and hold the on/off/pairing button forward until the display indicates “Pairing Mode”, then release. This may take up to 10 seconds.
3. Go into the Bluetooth menu on your cell phone and follow the cell phone’s instruction guide for pairing a Bluetooth headset. This generally involves going into a “devices” or “hands free” menu and adding a new device. Your phone may ask if you want to pair with the headset, accept by pressing “yes” or “OK” and confirm with the passkey or PIN 0000 (4 zeros).
Please accept the solution if it has helped.